View 50PP8545_1538553.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

rear-projection tv with hd input 43pp8545 50PP8545 user manual 3141 085 20041
2 setup and installation product highlights ..................................................................................................... 3 installing the tv .......................................................................................................... 4 using the tv keys .................................................................................................... 5 using the remote control keys .................................................................. 6-7 operation using the menus ................................................................................................. 7-17 overview ................................................................................................................. 7 install .................................................................................................................... 8-10 picture .............................................................................................................. 11-13 sound ....................................................................................................................... 14 features .......................................................................................................... 15-17 using smart surf ...................................................................................................... 18 using smart picture and smart sound ....................................................... 19 using teletext (if provided) ...................................................................... 20-21 peripheral equipment connecting peripheral equipment ........................................................ 22-24 selecting connected equipment for viewing ......................................... 24 general information care, cleaning and tips ...................................................................................... 25 before calling service ........................................................................................... 26 specifications .............................................................................................................. 27 thank you for purchasing this television set. you are now the proud owner of a philips tv, which promises full value to you as a customer. please read this manual carefully and thoroughly for help with installation and operation. contents safety information no naked flame sources, such as lighted candles, should be placed on top of the tv or in the vicinity. do not place your tv set under direct sunlight or heat. leave at least 5 cm around each side of tv set to allow for proper ventilation. avoid placing your set (e.g. near the window) where it is likely to be exposed to rain or water. no obects (such as vases) filled with liquids should be placed on top the tv so as to avoid dripping or splashing of liquids on the set. disconnect mains plug when: the red light below the tv screen is flashing continuously a bright white line is displayed across the screen cleaning the tv screen (never use abrasive cleaning agents use a slightly damp chamois leather or soft cloth) a lightning storm is occurring the set is left unattended for a prolonged period. never attempt to repair a defective tv yourself. always consult a skilled service person. battery usage caution to prevent battery leakage which may result in bodily inury or damage to the remote: install all batteries correctly, + and C as marked on the remote control. do not mix batteries: (old and new or carbon and alkaline, etc.). remove batteries when the remote is not used for a long time.
3 product highlights see it as an eyewitness progressive scan C double the visible picture lines for better resolution 100hz digital scan eliminates flicker and line itter for stable picture hdtv monitor C hdtv is the latest and best television signal available acclearium? digital optics maximizes picture quality on all inputs saphlon? screen C better picture and scratch resistance technology made simple active control measures signal to produce best picture auto intellisense? focus C one-touch automatic convergence of the crt tubes apac C automatic phosphor aging compensation rich sound experience virtual dolby ? * surround C surround sound without additional rear speakers product highlights 100hz digital scan conventional tv creates a picture by scanning 50 times per second (50hz). this frequency can be detected by the human eye in the form of a field flickering picture. 100hz sets scan 100 times per second, eliminating the field flickering. progressive scan a picture frame consists of two fields: the field with the odd lines (field a) and the field with the even lines (field b). instead of sending field a to the screen first, followed by field b, the fields a and b are written at one time. in one second, a full image is created using the maximum resolution. at this speed, the human eye perceives a sharper picture with no line structure. hdtv monitor hdtv display capability (1080i). hdtv monitors enable you to view high-definition or enhanced-definition tv programming in the 1080i or 480p signal format. in order to do so, the tv must be connected via its component video or rgb inputs to a set-top box, which is set to operate in the dtv mode. a dtv signal must be present in your area and the set-top box must be tuned to the proper channel. an external over-the-air antenna may be required. another option is hdtv broadcast satellite service. stunning realism in both picture and sound are delivered acclearium? digital optics philips micro phosphor crts feature improved optics for sharper, more detailed images and enhanced green phosphor, which creates deeper, more natural colours. hybrid proection lenses work in concert with each crt to improve focus and correct optical errors, removing distortion and creating a crisp picture to the edge of the screen. the lenticular screen has nearly one-third finer pitch (.515mm) than traditional screens improving picture detail and resolution. the philips wideband video amplifier reproduces the highest visible bandwidth in its class C resulting in significantly more picture detail in pure hd. saphlon? screen saphlon? screen technology is built with materials and processes that deliver more brightness and picture contrast. it guards against most scratches and fingerprints and eliminates the glare associated with a separate protective screen. auto intellisense? focus sensors in the tv scan a predefined test pattern and readust the signal on the crts to assure that red, green and blue are well aligned. active control with over 3,000 picture adustments per minute, this proactive control system continuously analyzes incoming video signal qualities for dynamic noise reduction and sharpness and then automatically corrects them to be like the settings you previously selected in the picture menu. apac apac is designed to minimize the effects of image retention from stationary images on the screen. because both analog sources (cable tv and dvd) and digital sources (hd and progressive scan dvd) have different aspect ratios (4:3, 16:9, 21:9, etc.), the picture on a digital television may have black bars on the sides or top and bottom. when black bars are detected in either the 4:3 or 16:9 viewing mode, apac automatically shifts the television picture pixel-by-pixel, ust enough to soften image retention. apac works in both the analog and digital modes, so it provides excellent protection. active control and apac, are trademarks of philips consumer electronics north america. intellisense is a registered trademark of philips consumer electronics north america. copyright 2002 philips consumer electronics. *manufactured under license from dolby laboratories. dolby and the double-d symbol are trademarks of dolby laboratories.
4 intellisen se channe l volu me me nu powe r installing the tv the maor benefit of this proection television is its large viewing screen. to see the large screen at its best, test various locations in the room to find the optimal spot for viewing. be sure to allow a minimum of 15 cm of space around the tv. to avoid cabinet warping, cabinet colour changes, and increased chance of set failure, do not place the tv where temperatures can become excessively hot C for example, in direct sunlight or near a heating appliance. magnetic fields, such as those of external speakers, may cause the picture to distort if the speakers are placed too close to the television. move the magnetic field source away from the tv until there is no picture distortion. insert the aerial plug firmly into the antenna in 75 ? note: this remote control functions with tvs that use the rc5 signalling standard. switch the tv on: press the mains power switch on the front of the tv. if the standby key is lighted, press the ch +/C keys, digit keys or the power key on the remote control. or press the standby or channel keys on the front of the tv. antenna in 5 ? 75
5 using the tv keys mains power key switches the mains power on or off. volume ?% ? % channel ?% ? % ? % power switches the tv on or activates standby mode. menu press to activate the on-screen menu. intellisense when pressed, automatically adusts the sets picture convergence using the auto intellisense ? focus feature. remote sensor receives infrared commands to activate controls when the remote control handset is aimed at it and remote keys are pushed.
6 using the remote control keys . (standby) switches the set off temporarily to standby mode. (the red light indicator lights up when the set is in standby mode.) to switch the set on from standby mode, press the standby, ch +/C, or digit (0-9) keys. allows you to switch from stereo to mono sound during stereo transmission or to choose between language or language during dual sound transmission. a/ch (alternate channel) allows you to alternate between the last viewed channel and the present channel. teletext allows you to navigate through a list of installed programmes for a quick overview of the channels and to activate the channel you have selected. see page 20-21. smart sound allows you to select from three predefined optimal settings C voice, music and theatre C and a personal setting based on your own selections through the onscreen sound menu. press the key repeatedly to select a setting. see page 19. dolby v. (with dolby* surround signals) allows you to select various factory surround-sound listening modes: dolby virtual (virtual dolby* surround) dolby virtual uses two speakers to simulate the surround effect produced by a multichannel system. incredible surround? in stereo sound mode C when switched on, the incredible surround? feature provides the feeling that the speakers are farther apart to enhance the home-cinema effect. in mono sound mode C when switched on, the incredible surround feature enables you to hear a spatial sound effect. menu displays the main menu. also allows you to go backwards in the menu system. cursor up allows you to select the next or previous item in the menu and to select a screen format. cursor left allows you to access the menus and adust the settings. +/C (volume) increases or decreases volume. digit (0-9) allows you to select a channel. note: for a two-digit number, the second digit must be entered before the C sign disappears. *manufactured under license from dolby laboratories. dolby and the double-d symbol are trademarks of dolby laboratories.
7 osd (status/exit) displays the channel number, sound and colour transmission modes, status of the sleep timer, channel name (if the channel has been named) and the current time (if the time has been set). allows you to navigate or make adustments in multipoint- convergence mode. allows you to switch the menu off. surf allows you to select up to 10 channels and quickly view them. see page 18. not applicable. smart picture allows you to select from four predefined optimal settings C rich, natural, soft and multimedia C and a personal setting based on choices you make through the onscreen picture menu. see page 19. active control? allows you to switch the active control? feature on or off. when active control? is on, it measures and corrects all incoming signals to provide the best picture-quality settings, controlling sharpness and noise reduction continuously and automatically. the onscreen active control? display items cannot be selected. see page 17. (format) each press selects another picture format. for av1, cvi, av2, or av3, the options are 4:3, auto, and expand 4:3. for av4 and av5 1080i signal sources, the options are 4:3 and compress 16:9. for av4 and av5 480p or 576p signal sources, no screen format options are available through the tv. control the format at the source (dvd player or digital set-top box). cursor right allows you to access the menus and adust the settings. cursor down allows you to select the next or previous item in the menu or to select a screen format. ch +/C (channel) allows you to select channels in ascending and descending order. [ (mute) allows you to mute the sound. to restore the sound, press the key again. av allows you to select the different signal sources connected to the tv. using the menus: overview press the menu key to display/cancel the main menu. use the cursor in the up/down directions to select a menu item. note: sometimes not all the menu items are visible on the screen; press the cursor up/down until you can see the item you desire. use the cursor in the left/right directions to display the menu and adjust the settings. press the menu key to return. press the osd key to switch the menu o. note: if no action is executed, the menu automatically disappears after about 20 seconds. menu select menu item switch menu off
8 using the menus: install selecting the menu language note: the menu languages available vary by model. press the menu key. select install with the cursor down. press the cursor right to select language . press the cursor right again. select your language with the cursor up/down. from this point on, all onscreen displays will appear in the language that you have chosen. now you can search for and store the tv channels in two different ways: with auto store or manual store (tuning in channel by channel). tuning channels automatically select auto store in the install menu. press the cursor right to start the searching. all the tv channels are searched for and stored automatically. when the tuning is completed, press the menu key to return to the install menu or press the osd key to switch the menu off. note: channel numbers will always be written in latin characters, even when a language that uses other characters has been selected. tuning channels manually manual tuning allows you to store channel by channel. you must go through every step of the manual store menu. select manual store in the install menu. press the cursor right to enter the menu. select colour system and press the cursor right. if auto is selected, the respective colour system will be automatically selected according to the transmission system. note: if reception is poor, select another colour system with the cursor up/down. press the menu key or the cursor left. select sound system and press the cursor right. if auto is selected, the respective sound system will be automatically selected according to the transmission system. note: if the reception is poor, select another sound system with the cursor up/down. press the menu key or the cursor left. select search and press the cursor left or right to start the searching. searching stops once a transmitting channel is found. note: if the reception is poor, select another colour and/or sound system.
9 select channel . key in the desired channel number with the digit keys or with the cursor left/right. press the cursor down. in case of poor reception, you can improve the reception by adjusting the frequency using fine tune . select fine tune and press the cursor left/right to adjust. in rare cases, certain tv channels may reproduce distorted or unstable pictures. select pll (phase locked loop) to switch to the setting 2 with the cursor left/right to restore the picture for the respective transmission. select store . press the cursor right. the message stored appears and the search menu item is highlighted again. now repeat steps 7-14 to continue searching for another transmitting channel. press the menu key to return to the install menu or press the osd key to switch the menu off. sorting channels according to your preference, you can change the order of the stored tv channels. select sort in the install menu. press the cursor right to enter the menu. key in the channel number in the from column you want to swap from. use the digit keys or the cursor left/right. press the cursor down and select to . key in the channel number in the to column you want to swap to. press the cursor down and select exchange . press the cursor right. the message exchanged appears and the selected channels are exchanged. repeat steps 3-7 until all tv channels are allocated as you like. press the menu key to return to the install menu or press the osd key to switch the menu off.
10 using the menus: install editing channels this feature allows you to edit or skip channels from the channel list that have bad or weak signals or channels that you do not watch often. note: once a channel is skipped, you cannot select it with the ch C or + key. you can only access the channel with the digit keys. select channel edit in the install menu. press the cursor right to enter the channel list. select the channel you want to skip with the cursor up/down. press the cursor right to skip the selected channel. the message skipped is displayed. press the cursor up/down to select another channel and repeat step 4. press the cursor let or the menu key to return to the install menu or the osd key to switch the menu o. note: to add back channels to the list, repeat steps 1-4 and press the osd key to switch the menu off. naming channels it is possible to assign a name to a tv channel. this feature allows you to enter a name or modify an existing name of a channel, including peripherals. note: even when you have selected another language in the language menu, only the english language character set is offered to enter names to the tv channels stored. select a tv channel or peripheral you want to assign a name or modify the existing name. select name in the install menu. press the cursor right to enter the menu. key in the selected character with the cursor up/down. move to the next character with the cursor right and key in the next character. you can key in up to a maximum o ive characters. press the menu key to store the named channel.
11 using the menus: picture accessing the menu press the menu key to display the main menu. select picture . press the cursor right to access the picture submenu. use the cursor in the up/down directions to select an item. use the cursor in the let/right directions to make adjustments or settings. press the menu key to return or press the osd key to switch the menu o. picture menu items brightness allows you to adust the brightness levels of the picture. colour allows you to adust the colour saturation of the picture. contrast allows you to adust the contrast levels of the picture. sharpness allows you to adust the edge definition of the picture to improve details. hue (only with ntsc signals) allows you to adust the colour mix of the picture. colour temperature offers the options normal , warm and cool . make your selection with the cursor let/right. normal keeps whites white. warm makes whites reddish. cool makes whites bluish. digital options digital scan includes 100hz plus digital scan , which together eliminate picture lickering and line jitter, oering a stable picture or relaxed viewing (no eye strain). 100hz oers ield licker reduction. progressive doubles the number o visible picture lines per ield by displaying all picture rame lines at once. this minimizes the visibility o the scan lines. auto detects the input signal and provides the appropriate mode or the best picture perormance. choose digital scan or pal 50hz signals and progressive scan or ntsc 60hz signals. dynamic contrast automatically makes the contrast in the darker and the brighter picture areas more noticeable as the image on screen changes. normally, select med . in certain circumstances it may be preerable to select min , max or off . intellisense when activated, automatically adusts picture convergence in 20 seconds or less. manual converge allows you to make additional picture convergence adustments to suit personal preferences to to further fine-tune the picture. note: the picture settings brightness, colour, contrast, sharpness (hue) and colour temperature are stored separately for channels 0-11 and for the external sources.
12 press to begin automatic picture convergence using the menus: picture using auto intellisense ? your projection tv has three colour projection tubes: one for red, one for green, and one for blue. when mixed in proper proportion, the beams of light coming from the tubes can produce any colour. to create a clear picture, however, these colour beams must be precisely aligned. this alignment is called convergence . bumps and vibrations, moving the set, or the presence of magnetic fields can cause the colour beams to become improperly aligned, or misconverged, resulting in a fuzzy picture. using the auto intellisense ? feature, you can automatically adjust convergence in 20 seconds or less. note: allow the tv to warm up for 20 minutes before using auto intellisense ? . activating auto intellisense ? through the onscreen menu select intellisense in the picture menu. press the cursor left or right to activate auto intellisense ? picture convergence will be adjusted automatically in 20 seconds. activating auto intellisense ? using the tv key with the tv on, press the intellisense key on the front of the tv. picture convergence will be adjusted automatically in 20 seconds. note: you can also manually adjust picture convergence to suit your personal preferences or to further fine-tune the picture. see the next section on using the manual converge controls. using manual converge: converge red/blue using the auto intellisense ? feature, you can automatically adjust convergence in 20 seconds or less (see the previous page). also, if you desire, you can use the manual converge controls to make additional convergence adjustments to suit your personal preferences or to further fine-tune the picture. note: allow the tv to warm up for 20 minutes before adjusting convergence. select manual converge in the picture menu. press the cursor down and select either converge red or converge blue . note: if various images in the picture have red outlines, select converge red . if various images in the picture have blue outlines, select converge blue . use the cursor right, left, up or down to adjust the cross hair until the colour outline is gone. the adjustment is automatically saved in the tvs memory when you exit the adjust mode. press the menu key to return or the osd key to switch the menu off. check the tv picture. if any colour outlines remain around the images, use the multipoint red (for red outlines) or multipoint blue (for blue outlines) control. see the next section for instructions for using those controls. tv keys
13 using manual converge: multipoint red/blue the multipoint red/blue convergence controls allow you to adust picture convergence at specific points on the tv screen. note: allow the tv to warm up for 20 minutes before adjusting convergence. adjust converge red or converge blue before using the multipoint red/blue controls. see the previous page. select multipoint red or multipoint blue in the manual converge menu. press the cursor right to enter navigate mode. use the cursor let, right, up or down to move to a cross hair that has a colour outline. press the osd (status/exit) key to enter adjust mode. use the cursor let, right, up or down to adjust the cross hair until the colour outline is gone. press the osd key to return to navigate mode. repeat steps 3-6 until all misaligned cross hairs have been adjusted. then press the menu key. for your multipoint adjustments to be stored in the tvs memory, you must activate save multipoint . note: if you are not satisfied with the adjustments you just made and want to start over, you can use the undo multipoint control. this control allows you to undo the adjustments, but only if you use it before saving. to save your multipoint adjustments: select save multipoint and press the cursor left or right. to undo your multipoint adjustments: select undo multipoint and press the cursor left or right. to restore the tvs picture convergence to factory settings, select restore factory and press the cursor left or right. press the menu key to return or the osd key to switch the menu o.
14 using the menus: sound accessing the menu press the menu key to display the main menu. select sound with the cursor down. press the cursor right to access the sound submenu. use the cursor in the up/down directions to select an item. use the cursor in the let/right directions to make adjustments or settings. press the menu key to return or press the osd key to switch the menu o. sound menu items treble attenuates or amplifies the high-frequency response of the audio output signal. bass attenuates or amplifies the low-frequency response of the audio output signal. balance adusts the balance of the right and left speakers sound output. avl (automatic volume leveller) automatically controls the volume level to avoid excessive level differences, especially when switching to another channel or during commercial breaks. headphone allows you to adust the volume and balance of the headphone. select headphone . press the cursor right. select volume or balance with the cursor up/down. press the cursor let/right to adjust. press the menu key to return.
15 using the menus: features accessing the menu press the menu key to display the main menu. select features with the cursor down. press the cursor right to access the features submenu. use the cursor in the up/down directions to select an item. use the cursor in the let/right directions to make settings. press the menu key to return or press the osd key to switch the menu o. activating the timer the timer feature allows you to set the timer to switch to another channel at a specified time while you are watching a channel or when the tv is in standby mode. you can also set the tv to switch off automatically at a specific time by setting a stop time. select timer in the features menu. press the cursor right to enter the timer. setting the timer press the cursor right again to enter time mode. key in the current time with the digit keys. you must use 24- hour or military time. for example: 2:15 p.m. is 14:15. if you entered an incorrect digit: complete the actual time with arbitrary numbers, then start again. press the cursor left to exit time mode. setting start time select start time with the cursor down. press the cursor right to enter the start time mode. key in the time you want the programme to switch on. press the cursor let to exit start time mode. setting stop time select stop time with the cursor down. press the cursor right to enter the stop time mode. key in the time you want the programme to be switched o. press the cursor let to exit stop time mode. selecting the channel select channel with the cursor down. select the channel you want to switch to. activating the timer select activate with the cursor down. press the cursor right to enter the activate mode to activate the timer.
16 using the cursor right, select once or daily , according to if you want to activate the timer on the selected channel and the selected time every day or only once. displaying the time select display with the cursor down. press the cursor right to select on or off , according to if you want to display the current time on the tv screen or not. press the menu key to return or the osd key to switch the menu off. activating the child lock the child lock feature allows you to lock channels to prevent children from watching certain programmes. entering the access code select child lock in the features menu. press the cursor right to enter the access code . key in the access code 0711 (the default access code). a message incorrect will appear. key in access code 0711 a second time. the message correct will appear and make the child lock menu accessible. changing the access code select change code to enter an access code of your choice. press the cursor right to enter the change code mode. key in the access code of your choice and confirm it again. the message correct will appear. activating the child lock select lock channel in the child lock menu. note: enter the access code if requested. see above. press the cursor right to enter the lock channel mode. use the cursor up/down to select the channel you want to lock. press the cursor right to lock the channel. a keylock symbol will appear beside the locked channel. from now on the locked channel(s) can be accessed only via the remote control. repeat steps 1-4 to unlock a locked channel. to clear all locked channels at once, select clear all in the child lock menu and press the cursor right. the message cleared will appear. press the menu key to return or the osd key to switch the menu off. using the menus: features
17 selecting the screen format the tvs screen format options allow you flexibility in viewing video sources. select a screen format using the cursor up/down keys or the onscreen menu. to use the onscreen menu: select format in the features menu. press the cursor right repeatedly to cycle through the dierent screen ormats and select your desired ormat. the options vary by input source (see speciics to the right): 4:3 ormat displays the 4:3 picture using the ull surace o the screen. auto ormat make the picture ill the screen as much as possible. expand 4:3 ormat expands movie images recorded in the letterbox ormat. the black bars at the top and bottom o the screen are expanded, thus illing the entire tv screen. compress 16:9 allows you to show widescreen, high- deinition video sources as they were intended or a more natural picture. black bars are displayed at the top and bottom o the screen. switching blue mute on the blue mute feature indicates to you the absence of signal in the transmission when blue mute is activated. select blue mute in the features menu. press the cursor right to select on to activate the blue mute eature. press the osd key to switch the menu o. switching active control? on turn active control? on using the remote control active ctrl key or the onscreen menu. to use the onscreen menu: select active ctrl in the features menu. press the cursor right to select on to activate automatic control o sharpness and noise reduction. press the osd key to switch the menu o. note: should your remote control be lost or broken, you can still change some of the basic picture and sound settings with the keys on the front of the tv. see page 5. for av4 and av5 480p or 576p sources: no picture format options are available through the tv. control the screen format at the source (dvd player or digital set-top box). for av1, cvi, av2, or av3 sources: for av4 and av5 1080i sources:
18 using smart surf adding channels to the surf list you can select a list or series of previously viewed channels with the surf key. this feature allows you to switch between different tv programmes that currently interest you. you can have up to 10 channels in the surf list. five channels are shown in the list at one time. cursor down/up as necessary to see all the channels in the list. select a channel you want to add to the surf list. press the surf key. cursor right to add the selected channel to the sur list. the channel is added when delete appears, representing the next available action. repeat steps 1-3 to add more channels to the sur list. press the osd key to switch the menu o. press the surf key repeatedly to cycle through channels. deleting channels to the surf list press the surf key. press the surf key again as many times as necessary to select the channel you want to delete rom the sur list. cursor right to delete the channel rom the list. to delete more channels, repeat the steps above.
19 using smart picture and smart sound the smart picture feature offers you a choice of five picture settings: personal, rich, natural, soft and multimedia. smart sound offers you a choice of four sound settings: personal, voice, music and theatre. press the smart ` hb smart b`bbfhf`b h note: the values shown in the picture/sound setting diagrams are sample values only. your televisions values may vary and display different numbers. smart picture ` options personal picture settings are based on your preference. rich emphasizes very vibrant colours. this option is desirable for av mode in a brightly lighted room. natural emphasizes all settings equally. soft emphasizes warm colours. this option is desirable for a dimly lighted room and gives a cinema-like effect when the light is switched off. multimedia emphasizes soft colours. this option is desirable for playing computer games. smart sound options personal sound settings are based on your preferences. voice brings voices to the forefront, emphasizing them. moves music to the background. music emphasizes music over voices. theatre provides a balance between voices and music. note: the personal settings are the ones that you make using the picture or sound menus. these are the only smart picture and smart sound settings that can be changed. all others are set at the factory.
20 using teletext (if provided) many tv channels broadcast information via teletext. each channel that broadcasts teletext transmits a page with information on how to use its teletext system. look for the teletext page with the main index (usually p. 100). depending on the tv channel, teletext is transmitted in different systems. the colours used in the options line correspond with the colour keys of your remote control. about teletext easy text considerably reduces the waiting time (on condition that the teletext broadcast of the particular tv channel is received for at least half a minute) by: a direct selection of previous and following pages that are in transmission and of the pages referred to in the options line at the bottom of the teletext screen a habit watcher list: frequently used pages are put automatically in a list of preferred pages so that they are immediately available the precapturing of the page numbers referred to in the displayed page and the precapturing of all the subpages. switching teletext on and off press the b hb `hh`f``bfh he`hh``hh` eb b `f`h``f f` b b`f`hhbee selecting a teletext page with the digit keys enter the desired page number with the digit keys. the page counter seeks the page or the page appears immediately when the page number has been stored in the memory. a message appears when you have entered a nonexistent or incorrect page number. page numbers beginning with 0 or 9 do not exist. choose another number. with the option line use the colour keys C which correspond to the coloured options at the bottom of the screen C to select the desired subect. if the option line is not on the screen, press the selected colour key twice. colour keys to select osd b
21 quickly running through the teletext pages press the cursor up/down or the ch +/C keys to run through the previous or the ollowing pages. selecting the index teletext page press the osd key to return to the main index (usually p. 100). selecting subpages when a selected teletext page consists of different subpages, one of the subpages appears on the screen. arrows in front of the page number indicate that other subpages are available. the other subpages can be selected in two ways: with the cursor left/right the other subpage numbers appear in white as soon as the transmission has found them. they are stored in the memory so that they are available while the teletext page is on screen. use the cursor left/right to select the previous or the following subpage. using special teletext functions enlarge press h `h```` ```fh` hh`b`bhhhfb reveal press e `bb`hhe`hb` hh` b`f osd h f e b `f f for uture use
22 connecting peripheral equipment you can connect a wide range of video and audio equipment to your tv in various ways. this page and the next one provide an overview of signal compatibilities and the types of equipment you can connect to the sockets. connection examples follow on subsequent pages. as necessary, also refer to the handbook for peripheral equipment. overview: standard inputs/outputs antenna in 75 ? socket C compatible with the broadcast standard in your area. use to connect radio-reuency (rf) signals rom vhf/uhf antennas or a cable system. ypbpr (component video input [cvi] sockets) C compatible with 480i and 576i signals. use to connect euipment having component video outputs, such as dvd players, laser-disc players, video-game players, satellite receivers or other euipment. use the input-av 1 l(et) and r(ight) audio sockets or sound connections. s-video (super video) sockets C compatible with 480i and 576i signals. use to connect peripherals having super vhs (s-vhs) outputs, such as vcrs, dvd players, laser-disc players, video-game players, satellite receivers or other euipment. video (composite) sockets (input-av 1, input-av 2 and tvs side socket panel [av3]) C compatible with 480i and 576i signals. use to connect peripherals having composite video outputs, such as vcrs, video-game players or other euipment. audio inputs (input-av 1, input-av 2 and tvs side socket panel [av3]) C use to connect rom the audio output sockets on vcrs, dvds or other peripherals. monitor out (video/audio) C use to connect to a vcr to record programmes rom the tv. or use the audio outputs to connect to an audio hi-i system. n headphone socket (stereo, 3.5 mm) C use to connect headphones or personal listening. the headphone impedance must be between 8 and 4000 ohms. subwoofer output C use to make optional connection to an external powered subwooer. overview: high-definition inputs the av4 and av5 sockets allow you to connect digital equipment with 1080i/480p (60hz) or 576p (50hz) signal output. av4 C use to connect digital euipment with a 1080i/480p (60hz) or 576p (50hz) signal output, such as digital set-top boxes or dvd players with progressive-scan capability. you can connect euipment with ypbpr component video or rgb outputs to the av4 sockets. h and v sync connections may side panel note: the side panel is av3. rear of tv
23 high-definition inputs C video synchronizing reference input av4, av5 accepts video sync according to: video description eia/cea-770.2-c eia/cea-770.3-c itu-r bt.1358 480p (60hz) 1080i (60hz) 576p (50hz) or may not be required for rgb connections. use the av4 l(eft) and r(ight) audio sockets for sound connections. see the handbook for the digital equipment you are connecting. av5 C use to connect digital euipment with a 1080i/480p (60hz) or 576p (50hz) signal output, such as digital set-top boxes or dvd players. the av5 socket accepts a db15 connector. note, however, that adaptors can also be used to connect rom component video output to this db15 socket. use the av5 l(et) and r(ight) sockets or sound connections. see the handbook or the digital euipment you are connecting. av4 and av5 digital high-definition inputs when you have digital equipment with 1080i or 480p signal output (60hz) or 576p signal output (50hz), connect it to the av4 or av5 inputs on your tv. examples o such euipment are digital set-top boxes and progressive-scan dvd players. connecting to av4 connect digital equipment with component video output (usually labeled y-pb-pr ) or with rgb output (phono-type connectors) to the av4 inputs or video and audio let and right. also connect to the h and v sync inputs on the tv i reuired or your digital euipment. note: the av4 sockets are compatible with some digital equipment having rgb outputs with sync on green or rgb with separate h and v sync. output standards for digital equipment, however, may vary by manufacturer. no industry standards have been established for hd television rgb signal systems, timing, synchronization, and signal strengths. if the digital equipment you want to connect to your tv offers both component video and rgb outputs, component video is the suggested connection to use. see the handbook for the digital equipment. connecting to av5 connect digital equipment with rgb or y-pb-pr output to the av5 inputs or video and audio let and right. a db15 cable or adaptor cable with a db15 connector is reuired. note: the av5 input cannot be used to connect a computer or any other vga device. notes regarding connecting to either av4 or av5: ? for connections to either av4 or av5 , be sure the tvs colour- space setting matches the output ( y-pb-pr or rgb ) of the digital equipment you have connected to the av4 or av5 inputs. see instructions for setting the tvs colour space on page 22. ? see the handbook for the high-definition equipment. ? if you notice scrolling images, wrong colours or no colour, no picture or even combinations of these on your screen, check to see if the connections have been done properly. rear of tv
24 connecting peripheral equipment setting the av4 and av5 colour space the term colour space refers to how colours are defined and appear on your tv. hen making connections to the av4 or av5 sockets, you will need to be sure the tvs colour space is set to match the output o the peripheral you have connected. press the av key on the remote control as many times as necessary to select the high-deinition input you desire, av4 or av5 . press the menu key to display the menu. select install with the cursor down. press the cursor right to enter the install menu. cursor down until the high-deinition input ( av4 or av5 ) is selected. the current colour-space setting appears to the right o av4 or av5 . to change the setting, cursor let or right. press the osd key to switch the menu o. selecting connected equipment for viewing equipment connected with an aerial cable only select the channel number under which you have stored the test signal with the digit keys. equipment connected to the back or to the side of the tv (av3) press the av key repeatedly to select av1 , cvi , av2 , av3 , av4 or av5 according to where you have connected your euipment at the back or the side o your tv. select cvi to view the playback o dvd discs i you used the input- av 1 component video input sockets ( y-pb-pr and audio l [mono] and r inputs). tv channels enter the channel number of the tv channel you want to watch with the digit or ch +/C keys. av
25 care, cleaning and tips warning concerning stationary images on the tv screen: do not leave stationary or letterbox images on screen for extended periods of time. this can cause uneven picture-tube aging. normal use of the tv should involve the showing of pictures that contain constantly moving and changing images that fill the screen. be careful not to leave nonmoving images on screen for extended periods of time or to display the same images on screen too frequently, because subtle ghost images can be left on the picture tubes. avoid showing the same stationary images more than 15 percent of your total viewing in any one week. sources of stationary images may be dvd discs, laser discs, video games, cd-i discs, videotapes, digital television boxes, broadcast channels, cable channels, satellite channels and others. here are some examples of stationary images (this is not an all-inclusive list you may encounter others in your viewing): dvd menus C listings o dvd disc content. letterbox black borders C black bars shown along the edges o the picture when a widescreen (16:9) movie is played on tv. video-game images and scoreboards. television station logos C present a problem i they are bright and stationary moving or low-contrast graphics are less likely to cause uneven aging o the picture tube. stock-market tickers C presented at the bottom o the tv screen. shopping channel logos and pricing displays C bright and shown constantly or repeatedly in the same location on the tv screen. all picture tubes age with use, with their light output diminishing over time. but by maintaining normal usemixing television picture types C you will create conditions or the tubes to age at an even rate. the result will be a tv picture that is evenly bright over the entire screen. placement of the tv see page 4. cleaning to avoid possible shock hazard, be sure the tv is unplugged from the electrical outlet before cleaning. regularly dust the tv with a dry, nonscratching duster to keep the tv clean. when cleaning the tv, take care not to scratch or damage the screen surface. avoid wearing ewelry or using anything abrasive. do not use household cleaners. wipe the front screen with a clean cloth dampened with water. use even, easy, vertical strokes when cleaning. gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool, clear water and a mild soap or detergent. use a clean, dry cloth to dry the wiped surfaces. occasionally vacuum the ventilation holes or slots in the back cover of the set. never use thinners, insecticide sprays, or other chemicals on or near the cabinet, as they might cause permanent marring of the cabinet finish. tips do not shift or move the set around when it is switched on. unevenness in colour in some parts of the screen may occur. end-of-life disposal of the tv philips is paying much attention to making its products environmentally friendly. your new tv contains materials that can be recycled and reused. specialised companies can dismantle your discarded tv at the end of its life, concentrating on the reusable materials and minimising the amount of materials to be disposed. please be sure to dispose of your old tv according to local regulations. disposal of exhausted batteries the batteries supplied do not contain the heavy metals mercury and cadmium. nevertheless, in many countries exhausted batteries may not be disposed of with your household waste. please ensure you dispose of exhausted batteries according to local regulations.
26 snowy picture and noise ? check the antenna connection. symptom what to do tv remote control does not work ? check that the batteries are installed correctly. ? replace the batteries, if necessary. ? clean the remote control and the remote-sensor window on the tv. ? be no farther than 6 meters from the tv when using the remote control and aim the remote control toward the tvs remote-sensor window. ? if the remote control still will not work, use the keys on the tv. no power ? check that the tvs power cord is plugged into the mains socket. if there is still no power, disconnect the plug. wait for 60 seconds and reinsert the plug and then switch on the tv again. ? see if the outlet is controlled by a wall switch. ? if you are using an ac power strip, be sure the fuse on the power strip is not blown. no picture ? check the antenna connection at the rear of the tv to see if it is properly connected to the tv input terminal. ? the broadcast station may be experiencing difficulty. try another channel. ? adjust the contrast and brightness settings or select another picture setting with the smart picture key on the remote control. ? if using peripheral equipment through the a/v inputs, be sure it is properly connected. ? be sure you have selected the correct signal source for viewing. ? if you are attempting to view a picture from a progressive-scan-capable dvd player connected to the av4 and av5 sockets, be sure you have switched the dvd player to progressive-scan mode. ? if you are using an hd receiver, be sure its output is set correctly (to hd or sd), based on the connection to the tv you have made. good picture but no sound ? increase the volume. ? check that the tv is not muted; press the [ key on the remote control. ? when no signal is detected, the tv automatically switches off the sound. this is proper operation and does not indicate a malfunction. ? check the transmission systems sound settings on the set. good sound but poor colour or no picture ? adjust the contrast and brightness setting or select another picture setting with the smart picture key on the remote control. ? check the transmission systems colour settings on this set. poor picture ? poor picture quality sometimes occurs when an s-vhs camera or camcorder has been connected to the side panel (av3) of the tv when another peripheral is connected to av1 or av2 simultaneously. in this case, switch off one of the other peripherals. colour patch (unevenness) ? switch off the tv by the mains power key. wait for 20 minutes before switching on again. ? be sure you have made connections correctly. ? if you have connected digital equipment to the av4 and av5 sockets, check the colour-space setting on the equipment or tv and change the setting on either if necessary. ? check to be sure the tv is not placed too near speakers or magnetic objects. ? adjust the tvs convergence. horizontal dotted lines ? this may be caused by electrical interference from appliances such as hair dryers or vacuum cleaners or other sources such as neon lights. turn off the appliance or move the tv. double images or ghost images ? high-rise building or hills may be obstructing reception. try using a highly directional antenna to improve the picture. one white line across the screen ? switch the tv off immediately and consult a qualified service person. nicam sound distortion (crackling noise) ? this could be due to antenna siting or reflected signal. ? switch over to mono by pressing the key on the remote control. if your problem is not solved, switch the tv off and then back on again once. never attempt to repair a defective tv yourself. check with your dealer or call a tv technician. before calling service
27 specifications picture/display aspect ratio: 4:3 display technology: proection tv, crt, 7 liquid cooled picture enhancement: acclearium digital optics, active control, apac, auto intellisense, black stretch, blue stretch, digital comb filter, color temperature, digital crystal clear, digital noise reduction, dynamic contrast, progressive scan, 100hz digital scan screen enhancements: saphlon screen, anti- aging circuit, anti- reflection, high brightness, high contrast size: 43pp8545, 43: 50PP8545, 50 supported display resolution computer formats: 640 x 480, 60hz video formats: 480i 60hz, 480p 60hz, 576i 50hz, 576p 50hz, 1080i 60hz sound bass enhancement: bass boost output power (rms): 30 watt rms (50hz-10khz at 5 thd) sound enhancement: automatic volume leveler speaker size: 4x6 speaker number: 2 speaker type: full range oval tuner/reception aerial input: 75 ohm iec-type auto store: yes standards: ntsc m (3.58-4.5), ntsc (4.43-5.5), pal b/g, pal d/k, pal i, secam b/g, secam d/k, secam k1 connectivity av1: 480i 60hz, 576i 50hz, cvbs in, ypbpr, audio l/r in av2: 480i 60hz, 576i 50hz, cvbs in, s-video y/c, audio l/r in av3: side, 480i 60hz, 576i 50hz, cvbs in, s-video y/c, audio l/r in, headphone out av4: 1080i 60hz, 480p 60hz, 576p 50hz, ypbpr, rgb+h/v av5: 1080i 60hz, 480p 60hz, 576p 50hz, db15, rgb+h/v output rear: subwoofer out, cvbs out, audio l/r out convenience child protection: child lock, parental control clock functions: clock, sleep timer convenience enhancements: auto program, auto picture modes, auto sound modes menu languages: /93 chinese-simplified, english /69 and /79: chinese-simplified, english, malay picture functions: freeze teletext: 100 page easytext (not available on /93.) remote control: rcs82d, batteries dimensions 43pp8545 product dimensions (wxhxd): 96 cm x 115 cm x 53 cm product weight: 57 kg carton dimensions: 106 cm x 125 cm x 62 cm weight incl. packaging: 65 kg 50PP8545 product dimensions (wxhxd): 113 cm x 148 cm x 62 cm product weight: 82 kg carton dimensions: 125 cm x 154 cm x 71 cm weight incl. packaging: 94 kg power complies with energy star, less than 1 watt standby mains power: /69, 79: 90-276v, 50/60hz /93: 160-276v, 50/60 hz. power consumption: 180 watts average these technical specifications are subject to change without notice.

▲Up To Search▲

Price & Availability of 50PP8545

	To Download 50PP8545 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .